There is no doubt that air conditioners make our life more comfortable and compatible. It keeps our home cool even during the sizzling hot days. There are so many factors that impact the performance of your AC. And electricity is one of the most integral factors among many.
During a storm, a power outage is a common problem, and probably that is the time when you have to live without an air conditioner. You will sweat a bit until the power is back, and your air conditioner starts running again.
But if your air conditioner did not start even after the power supply is back, you may be left wondering what is gone wrong with the system. Before calling for an Air Conditioning Service in Tucson, AZ, follow these simple steps if your air conditioner is not starting:
Turn Off the AC at The Thermostat
You must keep your thermostat in an “off” position to restart the air conditioning system. You need to find the switch “system” and turn your thermostat off.
Turn Off the AC at The Breaker
If you have already shut down the AC at the thermostat, the next thing you need to do is to switch off your air conditioner at the circuit breaker. Find out your AC switch and turn it off. Your circuit breaker can be established in the garage, laundry room, closet, or exterior part of your home.
Turn on Your AC at The Circuit Breaker
After you have completely switched off your air conditioning system at the breaker, it is time to start it again. Switch the circuit breaker to “on.”
Wait for Some Time
After switching on the circuit breaker, you need to wait for some time so that your air conditioner gets enough time to reset and turn it on again. It takes approximately half an hour for the entire process.
Set the Thermostat to Cool
Your thermostat needs to be in “cool” mode to provide you with cold air inside your house. After switching on the circuit breaker, the next thing you need to do is to set the thermostat to cool the setting and your air conditioner will start working again.
How to Know If The Problem is Not Due To A Power Outage?
After the power outage, when you perform the steps mentioned above, your air conditioner usually starts. But if your air conditioner is continuously tripping the breaker, it indicates that there are different problems. You can call for an air conditioning service to fix the issue with your AC. The reasons behind a continuously tripping breaker can be:
Blocked or clogged air filters can restrict the airflow inside your house. It also puts your air conditioning system under undue stress and makes the AC work harder to achieve its temperature. This leads your system to overheat the end resulting in the tripping of the breaker.
Low Refrigerant Level
Your air conditioner needs to work harder with a low level of refrigerant. When the refrigerant level is lower than required, it also makes your air conditioner work harder and results in overeating. You need to call for a professional air conditioning service to recharge your AC and detect any leakages.
Diamond AC and Heating are one of the best AC companies in Phoenix that provide local AC Installation in Tucson, AZ, and we can help you bring your system back to normal again after a power outage. Call our expert team if you want to schedule an emergency AC service or AC repair in Phoenix.