Energy Saving Tips For Homeowners

Older buildings have a lesser environmental impact than contemporary constructions, as we in the preservation movement are well aware. The Greenest Structure has said, ‘’Quantifying the Environmental Value of Building Reuse, demonstrated that reusing an existing building is more environmentally friendly than destroying it in almost every scenario—even when the new building replaces it is ‘green’.’’

But how about making your present historic house even more environmentally friendly? You may make several minor tweaks; just a few adjustments are required in most cases.

Tips for Energy Saving

With that in mind, we’ve developed a list of six low-cost solutions for reducing the environmental effect of your historic property while also saving energy and money in the long term.

1. Take Another Look at Your Lighting Alternatives

According to our AC Company in Tucson, AZ, lighting may account for up to a quarter of a household’s energy costs. If you need to replace lightbulbs, choose more energy-efficient, lower-wattage ones that provide equivalent or better light output and quality. LEDs are an excellent alternative to existing incandescent electric light bulbs because of their longer life. Furthermore, incandescent light bulbs produce more heat than light, making them inefficient compared to LEDs.

2. Double-Check That Everything is Turned Off

When lights and plug loads are not in use, ensure they are turned off at night and during the day. Plug loads are the energy requirements of equipment such as computers, printers, and other devices that are often plugged into an outlet for long periods. Even if you turn off your computer before night, it continues to drain your vitality (this is known as a “vampire load”). Unplugging will put a halt to the consumption of power indefinitely. It’s a tried-and-true approach for halving your electricity bill.

3. Seal All Doors and Windows to Prevent Drafts

According to our heat pump installation in Tucson, AZ, correcting drafts around openings like doors and windows accounts for up to $400 of the typical annual energy cost. Your thermostat may raise or decrease the heat due to drafts, resulting in a higher energy bill. Yikes! Thankfully, there is a simple solution.

4. Use the Shading Devices to Your Advantage

Shade devices and other energy-saving equipment are excellent ways to save money. Your energy bills will be lower in the summer if you use curtains, shades, and awnings to block direct sunlight. In the winter, though, make sure to raise the curtains, especially on south-facing windows. The warmth of the sun will efficiently warm your property. According to the Whole Building Design Guide, this method may save you between 5% and 15% of your energy cooling consumption.

5. Check Your Thermostat Once Again

Replace manual thermostats with programmable thermostats and dial-down heating and cooling systems while your house is unoccupied. Electricity savings may be achieved by using programmable thermostats. You may alter the times when the heat or air conditioning is activated.

6. Verify or Put in Place a Comprehensive HVAC Equipment Maintenance Schedule

Consult your contractor or the person from our heating services in Phoenix for your HVAC (heating, ventilation, and air conditioning) system to check whether it was intended to use as little energy as possible. A professional will also clean the drains of your air conditioning equipment. A clean and well-maintained system is much more efficient than one that might need some maintenance. An easy way to prevent wasting power is to use a programmable thermostat combined with an HVAC system.

Just call Diamond AC and Heating at (602) 753-5375 for further queries.

Scroll to Top